Manual Override - V2 NYK-24V Mode D'emploi

FIXING THE GEAR-MOTOR TO THE
BRACKETS
Fixing the gear-motor to the rear brackets. (FIG. 4).
Fixing the gear-motor to the front brackets (FIG. 5).
FIG.4

MANUAL OVERRIDE

Before operating the manual override disconnect the power.
Manual override has been thought for manual opening of the
gate in case of power-cut or motor breakdown.
• Open the release cover cap
• Insert the supplied key into the special cylinder and turn it
counterclockwise through 90 °.
RESTORE
• Insert the supplied key into the special cylinder and turn it
clockwise through 90 °.
• Replace the cap in the original position.
FIG.5
FIG.6
FIG.7
- 13 -