Housing Cleaning; Replacing The Inner Lamp - Kalorik MAXX AFO 50932 OW Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Never use abrasive products in the cavity. Never immerse the
appliance in water and make sure no water or damp penetrates the
appliance except the cavity. Make sure no water comes on the oven
door when the latter is still hot.

Housing Cleaning

Wipe clean with a damp sponge. Dry with paper towel.
NEVER use steel wool, metal scouring pads or abrasive cleaners, as
they may damage the finish.

Replacing the Inner Lamp

A replacement bulb is available to you should the original stop working. If
this is the case, you can call customer service at the address listed in the
"WARRANTY" section to get a replacement bulb. Be sure to perform the
following steps carefully:
1.
Unplug the appliance from the outlet and allow it to cool completely
to avoid electric shocks or burns.
2.
With your hand, carefully unscrew light bulb cover (rotate anti-
clockwise) and remove it from the oven. Make sure to place it
somewhere safe in the meantime.
3.
Using your hand again, pull on the light bulb without exerting too much
force until it pops out. Safely dispose of the damaged light bulb.
4.
Grab the new light bulb and carefully align it and secure it in place in
the base.
5.
Finally, take the light bulb cover and screw it back in place by rotating
clockwise.
6.
Your new light is ready for use!
DO NOT IMMERSE THE OVEN IN WATER OR ANY OTHER
ANY OTHER SERVICING SHOULD BE PERFORMED BY AN
www.KALORIK.com
AUTHORIZED SERVICE REPRESENTATIVE.
LIQUID.
27
AFO 50932 – 211026

Publicité

Table des Matières
loading

Table des Matières