Cleaning And Maintenance; Important - Kalorik PZM 43618 Mode D'emploi

SETTINGS
Temperature settings:
Setting 1: 250 °F / 120 °C
Setting 2: 465 °F / 240 °C
Setting 3: 570 °F / 300 °C
Setting 4: 645 °F / 340 °C
Setting 5: 715 °F / 380 °C

CLEANING AND MAINTENANCE

 Make sure to clean the appliance after each use!
 Unplug the appliance from outlet and switch the appliance off by
putting the knobs into the 0 position.
 Let the stone cool down and scrape off any cheese or pizza
ingredients that may have fallen onto the stone.
 Before cleaning more thoroughly, allow the unit to cool down
completely.
Reversible stone:
The pizza stone can be used on both sides. To change side, start by
scraping off any food remains from the side of the stone that was last
used. See below for cleaning instructions. Once the stone is free of any
food, remove it from the base, turn it upside down and replace it on
the base.
IMPORTANT: Make sure the side that will be close to the lower heating
element is free of any food remains.
Cleaning the reversible stone:
 Never use cooking oil or any types of detergents to clean the
cooking stone.
 Never immerse the stone in water.
 Scrape off any excess food with the metal paddles or a stiff
brush bristled brush and wipe clean with a paper towel or a
clean dishcloth.
www.KALORIK.com
9
PZM 43618 - 170120