Actim 1ngeni Manuel D'instructions page 33

ACCESSORIES
33
Specifications Summary:
Weight 490 g
Dimensions 113.8 mm W 172.0 mm D 148.0 mm H
Max. Print Speed (70mm/second)
Resolution 8 dots per mm
Label Shipping Label
SLP-SRL or SLP-SRLB (Bulk)
Following components included:
Smart Label Printer (SLP 620, SLP 650 or SLP 650SE)
Quick Start Guide
CD-ROM containing software and printer drivers
USB cable
Serial cable (SLP 650SE only)
AC adapter
Roll of Smart Labels
Specification SLP620 SLP650 & SLP650SE
Information: Model No. SLP 620
9.2 USB key
The SanDisk Cruzer Blade key is an example of a typical USB key proven to work with the
Actim 1ngeni instrument.
- Formatted for FAT32, min 1GB with only 1 partition.
- The USB Key doesn't perform CD-ROM emulation
- The USB Key does not have proprietary software loaded to run it.
- There is only one USB Key present during a software update process.
A USB key may take a few seconds to be detected by the ACTIM 1NGENI instrument drivers. A USB icon is
displayed in the header bar when a USB key has been successfully detected.
9.3 Barcode reader
Datalogic QuickScan Barcode Wand, QD2430
The Actim 1ngeni instrument can accept input from a standard USB connected barcode wand
when the barcode wand operates in "keyboard mode". In "keyboard mode" the wand will
supply a character string to the USB that appears in any enabled text box as if it were typed
from a keyboard.
Plug the cable into the instrument then connect it to the Actim 1ngeni instrument via USB. For
the complete setup and operating procedure refer the Datalogic QuickScan™ QD2430 user
manual.