Valor H6 Serie Instructions D'installation page 5

7. Holding the screen up, locate and drop bottom
brackets into slots of the removable panel, ensuring
the screen is secure and seated all the way down
into the bottom slots.
Note: There should be a 1" gap between the top
of the barrier screen and the frame's convection
baffl e.
Repair Parts List
Code Description
1 RH side panel
2 LH side panel
3 Upper bracket
4 Upper panel
5 Heatshield
6 LH side door
7 RH side door
8 Removable panel
9 Lower panel
10 Barrier screen
#8 x 1/2 s/t screws black (8)
not shown
#8 x 3/8 ph black screws (5)
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.
190 – 2255 Dollarton Highway, North Vancouver, BC, CANADA V7H 3B1
Maintenance
DO NOT TOUCH THE BARRIER SCREEN OR DO NOT TOUCH THE BARRIER SCREEN OR
FIREPLACE WHILE THEY ARE HOT! FIREPLACE WHILE THEY ARE HOT!
fi replace cool fi rst before cleaning it. fi replace cool fi rst before cleaning it.
FOR SAFETY PURPOSE, ensure the barrier FOR SAFETY PURPOSE, ensure the barrier
screen is re-installed on the fi replace front after screen is re-installed on the fi replace front after
maintenance if it has been removed. maintenance if it has been removed.
To clean the frame, use mild soap and water. To clean
the screen, dust it with a soft brush.
To clean the window and ceramics inside the fi rebox,
consult the Owner's Information section of the
Installation and Owner's Manual supplied with the
fi replace.
DO NOT CLEAN THE GLASS WINDOW WITH
AMMONIA!
Pièce n
o
4004529AZ
4004528AZ
4004394
4004527AZ
4004530AZ
4004535AZ
4004536AZ
4004533AZ
4005852AZ
4004587
4004560
100A757
Designed and Manufactured by / for
Miles Industries Ltd.
Tel. 604-984-3496 Fax 604-984-0246
www.valorfi replaces.com
WARNING
WARNING
!
4
5
1
6
10
Let the Let the
3
7
2
8
9
5