Valor H5 Serie Directives D'installation

The 1147 trim is intended to be used on Valor
heaters models 1100 & 1150. Mounting of the
1147 does not affect framing clearances or other
specifi cations listed in the heater installation
manuals—see installation manual supplied with
the heater for more information.
Considerations
• The Cast Mantel Surround is fi tted once the
installation of the fi replace, wall fi nish and
hearth are complete.
• The Cast Mantel Surround 1147 installs with
the Valor heater models 1100 and 1150 when
fi tted with either:
• 1145 Cast Backing Plate, or
• 1149 Edgemont Double Door Kit.
• The Cast Mantel is completed with one of the
1148 cast inlay decorative panels:
• 1148CIR—Cast Inlay Reeds
• 1148CIS—Cast Inlay Sheffi eld
• 1148CIT—Cast Inlay Thatch
• The customer can also use a custom
designed inlay panel set if desired.
1100 or 1150 engine
1148 Cast Inlay Panels
(supplied serparately)
Overview—Cast Mantel with 1145 Cast Backing Plate
4004242-01
© Copyright Miles Industries Ltd., 2014
H5 S
1147 Cast Mantel Surround
Use with Valor 1100 & 1150 Models only
Installation Instructions
1145 Cast Backing
Plate
(sold seperately)
1147 Cast Mantel Surround
ERIES
INSTALLER
Leave this manual with the appliance.
CONSUMER
Retain this manual for future reference.
54-7/8" (1392 mm)
39-5/16" (998.5 mm)
Overview—Cast Mantel with 1149 Edgemont
Double Doors
1100 or 1150 engine
1149 Edgemont
Double Doors
(sold seperately)
1147 Cast Mantel Surround
1148 Cast Inlay Panels
(supplied serparately)
3-7/8" (98 mm)
2" (52 mm)