Valor H5 Serie Directives D'installation page 3

Surround
1. Slide the legs of the surround over the cleats and
place the surround's top mounting brackets over the
wall brackets.
2. Bolt the surround to the wall brackets (2 bolts per
side).
3. Set the surround top piece in place. Its cast blocks
line up with the cast blocks of the surround.
4. Tighten the M6 x 10 mm set screw at each end of
the top piece to lock it into position.
Maintenance
WARNING
WARNING
!
DO NOT TOUCH THE FIREPLACE WHILE IT DO NOT TOUCH THE FIREPLACE WHILE IT
HOT! HOT! Let the fi replace cool fi rst before cleaning it. Let the fi replace cool fi rst before cleaning it.
FOR SAFETY PURPOSE, ensure the barrier FOR SAFETY PURPOSE, ensure the barrier
screen is re-installed on the fi replace front after screen is re-installed on the fi replace front after
maintenance if it has been removed. maintenance if it has been removed.
To clean the cast surround dust it with a soft brush.
To clean the window and ceramics inside the fi rebox,
consult the Owner's Information section of the
Installation and Owner's Manual supplied with the
fi replace.
DO NOT CLEAN THE GLASS WINDOW WITH
AMMONIA!
Top piece's cast block
Top piece
Surround's
cast block
Surround
Top piece
Set screw
at each end
Surround
3