Chauvet DJ FlareCON Air Guide De Référence Rapide page 4

FlareCON™ Air QRG
AC Power
Mounting
Mounting Diagram
Control Panel
Description
Menu Map
Main Level
Manual Channel
Auto Channel
Input Mode
Information
FlareCON™ Air has an external auto-ranging power supply that works with an
input voltage range of 100 to 240 VAC, 50/60 Hz. It runs on 9 VDC, 500 mA.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Before mounting this product, read the
The FlareCON™ Air can be mounted in different ways:
·
Hung from a pipe with a clamp using the threaded mounting holes
·
Placed on a surface
·
Attached to a pipe or stand using the hook and loop fastener strap
·
Mounted to a surface using the keyhole mounting holes
Button
<MENU> Selects an operation mode or exits from the current menu option
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Enables a search for available Wi-Fi™ channels on the
<AUTO>
FlareCON™ Air
Programming Level
<CH01–16>
<CHxx>
<WIFI>
<DMX>
WIFI SSID
<Wi-Fi™ name>
WIFI Channel
<01–16>
Safety Notes.
Keyhole Mounting Holes
Hook And Loop
Fastener
Function
Description
Manually selects a channel for the D-Fi™ network
Automatically selects an available channel for the
D-Fi™ network
Sets the input mode to wireless Wi-Fi™ signal input
Sets the input mode to wired DMX signal input
Displays the name of the current Wi-Fi™ network
(SSID)
Displays the number of the current channel
4
Threaded Mounting Holes
M10 and M12
EN