Chauvet DJ FlareCON Air Guide De Référence Rapide page 11

FlareCON™ Air QRG
Finding The Name
Of FlareCON™ Air
Wi-Fi™
Connecting To
FlareCON™ Air
Wi-Fi™
Connecting To A
DMX Controller
Controlling
DMX Lights with
D-Fi™ Hub
To find the name of the FlareCON™ Air Wi-Fi™, do the following:
1. Connect FlareCON™ Air to power. The red light will be on and the display
will be lit.
2. Make sure a channel is selected (see
mode is set to WIFI (see
3. Press <MENU> until Information shows in the display.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to display the current Wi-Fi™ name and channel
number. Use this default Wi-Fi™ name (SSID) from FlareCON™ Air to
select the Wi-Fi™ on your mobile devices.
6. Press <MENU> to exit the Information menu function.
To connect a mobile device to the FlareCON™ Air Wi-Fi™, do the following:
1. Connect FlareCON™ Air to power. The red light will be on and the display
will be lit.
2. Make sure the input mode is set to WIFI.
3. To connect your mobile device to the FlareCON™ Air Wi-Fi™, use the
Settings function of the mobile device to select the Wi-Fi™ network named
in FlareCON™ Air's information screen.
4. Open the FlareCON™ app. The SSID displays in the center of the screen.
Information about connecting your mobile device to a wireless network can
be found in the documentation that came with your mobile device.
Once connected, the name of the FlareCON™ Air default Wi-Fi™ can
be changed in the FlareCON™ app. See the FlareCON™ User Manual
for more information.
http://www.chauvetlighting.com/product-manuals-literature/.
To configure a system that uses a DMX controller connected to FlareCON™ Air
to control lights (see DMX Signals from a Controller via
1. Set FlareCON™ Air for DMX input. See
2. Connect a DMX cable from the DMX Out of the controller to the DMX In of
FlareCON™Air.
3. Configure remaining products. See
Air.
For information about operating the DMX controller, see the User Manual for the
controller. User Manuals for CHAUVET® controllers are available from the
Chauvet web site at http://www.chauvetlighting.com/product-manuals-literature/.
FlareCON™ Air can wirelessly control DMX lights when it is used with a D-Fi™
Hub.
To configure a system that uses FlareCON™ Air and a D-Fi™ Hub to wirelessly
control DMX lights, do the following:
1. Configure products as instructed in
Air using a D-Fi™ Hub as one of the wirelessly receiving products.
2. Connect a DMX cable from the DMX Out of the D-Fi™ Hub to the DMX In
of the DMX product.
Information about using D-Fi™ Hub can be found in its manual on the Chauvet
website at http://www.chauvetlighting.com/product-manuals-literature/.
Selecting A
Selecting A Signal Input
User Manuals
Selecting A Signal Input
Setting Up Products with FlareCON™
Setting Up Products with FlareCON™
11
Channel) and the input
Mode).
are available
Cable), do the following:
Mode.
EN
at