Télécharger Imprimer la page

Chauvet DJ FlareCON Air Guide De Référence Rapide page 2

Masquer les pouces Voir aussi pour FlareCON Air:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
FlareCON™ Air QRG
About This Guide
Disclaimer
Safety Notes
Contact
The FlareCON™ Air Quick Reference Guide (QRG) has product information
such as mounting, menu options and operation.
The information and specifications contained in this QRG are subject to change
without notice.
The Safety Notes below include important information about installation, use, and
maintenance.
·
Always connect the product to a grounded circuit.
·
Make sure the power cord is not crimped or damaged.
·
Always disconnect the product from the power source before cleaning it.
·
Never disconnect the product from the power source by pulling or tugging on
the cord.
·
Make sure there are no flammable materials close to the product when it is
operating.
·
The product is not intended for permanent installation.
·
The product is for indoor use only! It is rated at IP20.
·
Do not expose the product to rain or moisture.
·
Always make sure that the product's power source voltage is within the range
stated on the sticker or rear panel of the product.
·
Never connect the product to a dimmer or rheostat.
·
Always install the product in a location with adequate ventilation, and leave
at least 20 in (50 cm) between the product and adjacent surfaces.
·
Always install FlareCON™ Air within 600 ft (183 m) of the D-Fi™ products.
·
FlareCON™ Air should be within 100 ft (30.5 m) of the mobile device
running FlareCON™ app.
·
The maximum ambient temperature (Ta) in which the product can be used is
104 °F (40 °C). Do not operate the product at higher temperatures.
·
Be sure that no ventilation slots on the product's housing are blocked.
·
In the event of a serious operating problem, stop using the product
immediately.
·
Never try to repair the product. Repairs carried out by untrained people can
lead to damage or malfunction.
·
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
·
From outside the U.S., UK, Ireland, Mexico, or Benelux, contact the
distributor of record to request support or return a product.
·
From inside the U.S., UK, Ireland, Mexico, or Benelux, use the information
in
Contact Us
at the end of this QRG.
2
EN

Publicité

loading