Publicité
Les langues disponibles
Les langues disponibles
www.CrowderSupply.com • Toll Free: 888-883-5144
CP 4123, CP 4125
Overview
To reduce the risk of serious injury or
death to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.
Design and function
CP 4123 is a pneumatic tool designed for
rugged use in foundries, fabrication shops and
construction applications. The different stroke
versions offer the power levels necessary for a
variety of applications, from light to medium
chipping and trimming through heavy cutting.
The machine can be used both horizontally and
vertically. No other use is permitted.
CP 4125 is a pneumatic tool designed for rugged
use in foundries, shipyards, refineries, fabrication
shops and construction applications. The 22" to
4" stroke versions offer the power levels necessary
for a variety of applications from light to medium
chipping and trimming through heavy cutting.
The machine can be used both horizontally and
vertically. No other use is permitted.
Choosing the correct
pneumatic hammer
It is important to choose the correct size of
pneumatic hammer for the work to be performed.
A pneumatic hammer that is too small means that
the work will take longer.
A hammer that is too large means that there must
be frequent repositioning, which is unnecessarily
tiring for the operator.
A simple rule for choosing the correct size of
pneumatic hammer is that a normal sized piece
of broken material should be removed from the
workpiece within 5-10 seconds of operation.
If it takes less than 5 seconds a smaller
pneumatic hammer should be selected.
If it takes more than 10 seconds a larger
pneumatic hammer should be selected.
9800 0606 90
Safety and Operating instructions
main parts
A
B
C
D
A.
Trigger
B.
Handle
C.
Piston
D.
Cylinder
E.
Air intake
F.
Tool bushing
G.
Lock coil
H.
Retainer
E
F
G
H
11
Publicité
