Rear Panel - Samsung MX-JS8000 Mode D'emploi

Rear Panel

FM Antenna Terminals
1. Connect the FM antenna to the FM
antenna connector terminal.
1
2. Slowly move the antenna wire until you find
a location where reception is good, then
fasten it to a wall or other rigid surface.
AUX IN 2 Terminals
1. Use an Audio Cable (not supplied) to
connect AUX IN 2 on the main unit to
Audio Out on an external analog output
device.
• Be sure to match connector colors.
• If the external analog output device has
only one Audio Out jack, connect either
2
left or right.
• Press the AUX 1/2 button to select
AUX 2.
• If the product is in AUX mode for more
than eight hours and no buttons on the
front panel or remote are pushed, the
system will turn off.
AUX IN 1 Terminals
1. Use to connect an external device
such as an MP3 player.
• Connect AUX IN 1 on the rear panel
3
of the main unit to the Audio Out of an
external device/MP3 player.
• Press the AUX 1/2 button to select
AUX1.
34 5 6
1 2
LED Terminals for Speaker Beat
Waving.
4
ONLY FOR SERVICE
• This jack is for testing only. Please do
5
not use.
2.2 CH Speaker Terminals
1. To achieve the correct sound quality,
when you connect the speakers, match
the color of the speaker plugs to the
color of the speaker jacks. See below.
6
• LEFT channel (marked
• RIGHT channel (marked
• Don't force the Purple SUBWOOFER
connector into the White or Red speaker
jack.
Cooling fan
• The fan operates while the unit is
powered on.
If you set the unit to the minimum
7
volume, the fan won't operate.
Secure a minimum 6 inches (15 cm) of
clear space on all sides of the fan when
installing the main unit.
POWER
8
• Insert only the provided power cable.
7
English
7 8
, White/Purple).
, Red/Purple).