To Connect The Hi-Fi Component To A; Bluetooth Device - Samsung MX-JS8000 Mode D'emploi

Functions
• A Bluetooth device may cause noise or
malfunction, depending on usage, when:
- A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Hi-Fi Component.
- It is subject to electrical variation from
obstructions caused by a wall, corner, or
office partitioning.
- It is exposed to electrical interference from
same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
• Pair the Hi-Fi Component with the Bluetooth
device while they are close together.
• The greater the distance between the Hi-Fi
Component and the Bluetooth device, the worse
the quality. If the distance exceeds the Bluetooth
operational range, the connection is lost.
• In poor reception areas, the Bluetooth
connection may not work properly.
• The Bluetooth connection only works when
the Bluetooth device and the Hi-Fi Component
are close together. The connection will be
automatically cut off if the Bluetooth device
is out of range. Even within range, the sound
quality may be degraded by obstacles such as
walls or doors.
• This wireless device may cause electric
interference during its operation.

To connect the Hi-Fi Component to a

Bluetooth device

Before you begin, confirm that your Bluetooth
device supports the Bluetooth-compliant stereo
headset function.
1. Press the Bluetooth button of the Hi-Fi
Component to display the BLUE-TOOTH
message.
• You will see WAIT for a short period of time
and then READY on the front display of the
Hi-Fi Component.
2.
Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select "[Samsung] HI-FI XXXXXX J-Series"
from the list.
• When the product is connected to the
Bluetooth device, it will display Device
name ; CONNECTED ; BLUE-TOOTH
on the front display.
• If the Bluetooth device has failed to pair
with the product, delete the previous
"[Samsung] HI-FI XXXXXX J-Series"
found by the Bluetooth device and have it
search for the product again.
4.
You can listen to the music playing on the
connected Bluetooth device over the Hi-Fi
Component system.
• In Bluetooth mode, some model's Play/
Stop/Next/Back functions are not available.
| NOTES |
✎ The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
(328kbps@44.1kHz).
✎ The AVRCP feature is not supported.
✎ Connect only to a Bluetooth device that
supports the A2DP (AV) function.
✎ You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
✎ Only one Bluetooth device can be paired at a
time.
✎ Once you have turned off the Hi-Fi Component
and the pairing is disconnected, the pairing will
not be restored automatically. To reconnect, you
must pair the device again.
✎ The Hi-Fi Component system may not search
or connect properly in the following cases:
16
English