Micro-Star International MS-7143 Mode D'emploi page 18

and performance. But if you are plagued by EMI, select the desired range for EMI reduction.
Remember to disable Spread Spectrum function if you are overclocking, because even a slight
jitter can introduce a temporary boost in clock speed which may just cause your overclocked
processor to lock up.
CPU Clock
This item allows you to select the CPU Front Side Bus clock frequency (in MHz) and overclock
the processor by adjusting the FSB clock to a higher frequency. Setting options:
For CPU
For CPU
Memory Voltage
Adjusting the memory voltage can increase the DDR speed. Any changes made to thist setting
may cause a stability issue, so changing the memory voltage for long-term purpose is NOT
recommended.
PCI Express Voltage
PCI Express voltage is adjustable in the field, allowing you to increase the performance of your
PCI Express device when overclocking, but the stability may be affected.
Load BIOS Default
You can load the BIOS default values provided by the mainboard manufacturer for the stable
performance.
FSB200: [200]~[235]
FSB133: [133]~[165]
12