Cleaning The Housing; Cleaning The Air Suction Grill; Storage; Troubleshooting - SilverCrest SHTK 2000 B1 Mode D'emploi

Cleaning the housing

GB

Cleaning the air suction grill

Storage

Troubleshooting

28
CAUTION - PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.
■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments.
■ Please dry everything off properly before using the appliance again.
WARNING - RISK OF FIRE!
Clean the air intake grill 3 at regular intervals with a soft brush.
►
1) Turn the air intake grille 3 slightly so that it can be removed from the hair-
dryer.
2) Clean the openings of the air intake grill 3 with a soft brush.
3) Replace the air intake grille 3 back onto the hair dryer so that the lugs on
the air intake grille 3 engage in the slots on the housing of the hairdryer.
Turn the air intake grille 3 slightly so that it engages and is fi rmly seated on
the housing.
CAUTION - PROPERTY DAMAGE!
► First pack and transport the hair dryer when it has completely cooled
down. Otherwise, it could damage other items.
■ Clean the hair dryer as described in the section "Cleaning".
Retract the cord by pressing the cord retract button 2.
■
■ Store the hair dryer at a dustfree and dry location.
Should your hair dryer not function as expected, fi rst remove the plug from the
mains power socket and allow the appliance to cool down for a few minutes.
The appliance is fi tted with an overheating protector!
Should the appliance still not function, consult the service department detailed
under "Service".
SHTK 2000 B1