Fox RX+ micron Mode D'emploi page 6

ENGLISH
6
Multi Colour LEDs with Colour Sync™
This allows the choice of six colours (Red, Green, Blue, Orange, Purple &
White) to be selected with the push of a button.
The button is located on the left side of the battery cover when looking
at the back of the alarm and has this symbol on it.
Your choice will remain stored in the memory of the RX+ Micron even
when the batteries have been removed. This selection will govern the
colour in both Day Mode and Night Mode so any colour change in one
setting will change the other. The RX+ Micron automatically synchroniz-
es the colour selections with the RX+ Receiver.
When the RX+ Micron is switched on the LEDs will illuminate, cycle
through their colours and stay on the selected colour for 10 seconds.
When the RX+ Micron is triggered the LEDs will illuminate in your chosen
colour and stay on or flash (depending on the direction of line
movement) for 10 seconds from the last movement of the roller wheel.
Vari-Bright adjustable brightness function
This allows the choice of 3 LED brightness settings in DAY mode and 3
different brightness settings in NIGHT mode, with the push of a button.
The button is located on the right side of the battery cover when
looking at the back of the alarm and has this symbol on it.
To select the brightness, set the RX+ Micron into DAY or NIGHT mode as
desired and press the brightness button to change the setting.
Your choices will remain stored in the memory of the RX+ Micron,
even when the batteries have been removed.