Important Safeguards - Hamilton Beach Stack & Snap 70820 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to
persons, including the following:
1.
Read all instructions.
2.
This appliance is not intended for use by persons with reduced
physical, sensory, or mental capabilities, or lack of experience
and knowledge, unless they are closely supervised and instructed
concerning use of the appliance by a person responsible for their
safety.
3.
This appliance shall not be used by children. Keep the appliance and
its cord out of reach of children.
4.
Close supervision is necessary when any appliance is used near
children. Children should be supervised to ensure that they do not
play with the appliance.
5.
To protect against risk of electrical shock, do not immerse base,
motor, cord, or plug in water or other liquid.
6.
Turn the appliance OFF( ), then unplug from outlet when not in use,
before putting on or taking off parts, and before cleaning. To unplug,
grasp the plug and pull from the outlet. Never pull from the power
cord.
7.
Avoid contacting moving parts. Keep fingers out of feed chute.
8.
Do not operate any appliance with a damaged supply cord or plug, or
after the appliance malfunctions or has been dropped or damaged in
any manner. Supply cord replacement and repairs must be conducted
by the manufacturer, its service agent, or similarly qualified persons
in order to avoid a hazard. Call the provided customer service number
for information on examination, repair, or adjustment.
9.
The use of attachments not recommended or sold by the appliance
manufacturer may cause fire, electric shock, or injury.
10. Do not use your food processor if any part is broken.
11. Do not use appliance outdoors.
2

IMPORTANT SAFEGUARDS

12. Do not let cord hang over edge of table or counter or touch hot
surfaces, including stove.
13. Keep hands and utensils away from moving blade and disc while
processing food to reduce the risk of severe personal injury and/or
damage to the food processor. A rubber scraper may be used but
ONLY when the food processor is not running.
14. Blades are sharp. Handle cutting blades carefully when inserting
or removing, emptying the bowl, and during cleaning. Store out of
reachof children.
15. To reduce the risk of injury, never place cutting blade or disc
on base without first putting bowl properly in place.
16. Be certain lid is securely locked in place before operating appliance.
17. Never feed food into food chute by hand. Always use the food
pushers.
18. Do not attempt to defeat the lid interlock mechanism.
19. Make sure the blade or disc has come to a full stop before removing
lid.
20. To reduce the risk of injury, be sure to insert or remove blade and disc
using hubs provided for this purpose. Use caution when removing
blade and disc from the bowl, when emptying the bowl, and when
cleaning.
21. Check that the appliance is OFF ( ) before plugging cord into wall
outlet. To disconnect, turn the control to OFF ( ); then remove plug
from wall outlet. To unplug, grasp the plug and pull from the outlet.
Never pull from the power cord.
22. Be sure to turn switch to OFF ( ) position after each use. Always
use the pushers to clear the food chute. When this method is not
possible, unplug cord from outlet and disassemble unit to remove the
remaining food.

Publicité

Table des Matières
loading

Table des Matières