Technical Data; Noise/Vibration Information - Bosch PKS 55 Notice Originale

Technical Data

Hand-held circular saw
Article number
Rated power input
No-load speed
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
CutControl
Dust/chip box
Base plate dimensions
Max. saw blade diameter
Min. saw blade diameter
Max. base blade thickness
Locating bore
Weight according to
EPTA-Procedure 01:2014
Protection class
A) PKS 66 AF/PKS 66-2 AF with guide rail
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Turn-on transients cause brief drops in voltage. Other tools may be adversely affected by these if the conditions in the electricity supply are unfa-
vourable. Malfunctions are not expected if the impedances in the electricity supply are below 0.36 ohms.

Noise/Vibration Information

Noise emission values determined according
to EN 62841-2-5.
Typically, the A-weighted noise level of the power tool is:
PKS 55:
Sound pressure level 92 dB(A); sound power level
103 dB(A). Uncertainty K = 3 dB.
PKS 66:
Sound pressure level 93 dB(A); sound power level
104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-5:
2
Sawing wood: a = 4.0 m/s , K = 1.5 m/s
h
2
Sawing metal: a = 3.0 m/s , K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
Bosch Power Tools
PKS 55
3 603 E00 0..
W 1200
-1
min 5600
mm
mm
mm 288 x 153
mm
mm
mm
mm
kg
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
Only use saw blades the maximum permitted speed of
u
2
which is higher than the no-load speed of the power
2
tool.
Inserting/changing the circular saw blade
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Wear protective gloves when fitting the saw blade.
u
Danger of injury when touching the saw blade.
Do not use abrasive wheels as the application tool un-
u
der any circumstances.
PKS 55 A
PKS 55-2 A
3 603 E01 0..
1200
5600
55 55
38 38
● ●
– ●
– ●
288 x 153
160 160
150 150
1.8 1.8
20 20
3.9 3.9
/ II / II
1 609 92A 4FT | (15.04.2019)
English | 17
PKS 66 A
A)
PKS 66 AF
A)
PKS 66-2 AF
3 603 E02 0..
1600
5000
66
48
●
●
●
327 x 160
190
184
1.8
30
5.4
/ II