Measurement Procedure; Taking A Measurement - Gima 32924 Notice D'utilisation

33

mEasUrEmEnt procEdUrE

switch on the monitor
A. Press button to switch on the monitor.
B. All segments appear on the screen.
setting year, date and time
A. Press button ("YEAR" flashes). Press
to adjust YEAR value.
B. Press button ("MONTH" flashes). Use
(1, 2, 3,......, 12).
C. Adjust DATE (1, 2, 3,..., 31), HOUR (1, 2, 3,........12
(00,01,02,03,.....59) as described in Step A above.
When settings are done, press
The device is ready for use.

taking a measurement

A. Before measurement, press
B. With the cuff wrapped around your arm, press
All display units appear on the screen.
*Note!
Do not inflate the cuff until it is wrapped around your arm.
After all symbols disappear, the display will show "00".
The monitor is "Ready to Measure" and will automatically
inflate to the level that is right for you.
C. After inflation of the cuff, the pressure will slowly decrease.
When pulse is detected, PULSE SYMBOL
+
+
button to confirm the entries.
+
button to select User 1, 2, or 3.
ENGLISH
button
button to adjust MONTH
,1 ,..., 12) and MINUTE
PM PM
button to start measurement.
flashes.