Veeder-Root TLS2 Mode D'emploi page 10

System Setup Screens
This section describes all of the TLS2 System Setup Screens along with setup choices and explanations that you will need
for data entry. Because the TLS2 Setup Displays have only English labels, Screen Label codes have been placed in brackets
beneath every English label to let you quickly find a translation of the label and the page number(s) of the Screen in which
the label is used. Tank Setup Screens are covered in a separate section.
Entering data, confirming selections, etc. is done through one of several Data Entry Screens which display when you touch
any button to the right of a data entry window. These screens are described where they are first discussed in this section.
System Status (Home) Screen
11
10
Legend for numbered boxes
1
Date/time window - displays current date and time
2
Message window - displays All Functions Normal or
active alarms.
3
Alarm button - touch to acknowledge alarm and
silence alarm beeper. Note: touching this button does
not clear the alarm - the problem that caused the
alarm must be repaired.
4
Print button - For menu screens, touch this button
and all items available through the menu are printed
to a connected printer. For non-menu screens only, a
print dialog box appears when the print button is
touched. The user also has the option to cancel the
print.
5
Main Menu button - touch to display the Main Menu
Screen (page 6) for access to system/tank setup and
manual tank testing.
1 2
01-01-2000 ALL FUNCTIONS NORMAL
12:00 AM
9 8
3 4
7 6
6
Environmental Report button - touch to display tank
leak test results (page 49).
7
Alarm Report button - touch to display the Active
Alarm Status (and History) Screen (page 52).
8
Delivery Report button - touch to display the Delivery
Report Screen (page 49).
9
Inventory Report button - touch to display the
Inventory Report Screen (page 50).
10
Tank buttons - touch any tank button to display the
current inventory report for that tank.
11
Screen title window.
12
Manual Shift Close button - touch to manually close
the shift. (visible only if Snapshot is selected in Shift
Time (System Setup) as the Shift Close Method.
5
12
5