Start Up Instructions; List Of Materials; Mounting The Machine - Garland ULTIMATE 818 LE Manuel D'instructions

Table des Matières

Les langues disponibles

English

5. START UP INSTRUCTIONS

This machine includes the following elements that you

will find included in the box:

• High pressure machine

• Handle with cable winder

• Adjustable water jet

• Lance turbo

• Gun

• Wire for lance cleaning

• Instruction manual

1. . Mount the hose joint.

Make sure that the filter is in place (5a) before

mounting the hose joint. This filter is vital to avoid the

entry of impurities that could damage the pump of the

machine.

2. Connect the water entry hose using a quick

connector.

3. Connect the gun to the other high pressure

terminal.

4. Connect the lance to the gun.

5. Connect the cable to the mains.

5.3. VERIFICATION POINTS PRIOR TO USE

The current supply and its related tension must be

those stipulated on the characteristics label.

Check the machine and look for lose pieces

(screws, nuts, covers etc) and for any

28/96

Table des Matières