Start Up Instructions; List Of Materials; Mounting The Machine - Garland ULTIMATE 315 E Manuel D'instructions

English

5. START UP INSTRUCTIONS

5.1. LIST OF MATERIALS

This machine includes the following elements that you
will find included in the box:
• High pressure machine
• Handle with cable winder
• Rotating lance
• Standard lance
• Gun
• High pressure hose
• Wire for lance cleaning
• Electric cable support
• Lance support
• Hose joint
• Brush
• Instruction manual

5.2. MOUNTING THE MACHINE

1. Mount the cable winder and the
handle.
Insert the handle and the cable
winder to the main body of the
machine.
Place the screws and secure
tightly.
2. Mount the winder
Place the electric support on the
side of the machine where the
electric cable is by inserting and
pushing downwards.
3. Mount the electric cable
support.
Place the electric support on the side of the machine
where the electric cable is by inserting and pushing
downwards.
5. Mount the hose joint.
mains.
5.3. VERIFICATION POINTS PRIOR TO USE
The current supply and its related tension must be
those stipulated on the characteristics
label.
Check the machine and look for lose pieces
28/104
4. Lance support.
Place the lance support on the
opposite side to that of the cable
support by inserting and pushing
downwards.
Make sure that the
filter is in place (5a) before
mounting the hose joint.
This filter is vital to avoid
the entry of impurities that
could damage the pump
of the machine.
6. Connect the water
entry hose using a quick
connector.
7. Connect the high
pressure hose.
8. Connect the gun to
the other high pressure
terminal.
9. Connect the lance to the
gun and rotate 90º.
10. Connect the cable to the