ARENDO 303919 Mode D'emploi page 34

11. Error codes
Error E01: Machine head is raised during operation.
Error H:
1. Overheating (unplug for approx. 1 hour and then restart).
2. Overload (unplug for approx. 1 hour and then restart).
3. MOS damaged.
4. Hall sensor does not recognise that the motor is working.
The company WD
303919/305453/305458
er relevant stipulations. A complete conformity statement can be obtained from:
WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover
34
WEEE directive 2012/19/EU
WEEE Register no.: DE 67896761
Plus GmbH hereby
complies with the fundamental requirements and all oth-
certifies that the appliance
English