Publicité
Les langues disponibles
Les langues disponibles
6. Countdown function
1.
To set the countdown time, turn the "Speed control knob" anticlockwise for
approx. 3 seconds.
2.
The preset time is 2 minutes and is displayed as 02:00 on the LED screen.
3.
Turn the knob clockwise once, the time increases by 10 seconds, i.e. 2
minutes 10 seconds. Turn the knob anticlockwise once, the time decreases
by 10 seconds, i.e. 1 minute 50 seconds.
4.
Then turn the "Speed control knob" anticlockwise again for 3 seconds, the
timer is fixed and the countdown is set.
5.
Turn the "Speed control knob" clockwise to select the speed. The appliance
starts to work. It switches off automatically when the timer has finished
counting down.
7. Safety switch
Operation is only possible if the motor unit is lowered. Make sure it is placed
properly. Only then can the appliance be started.
8. Cleaning and Care
Unplug the power cord from the mains outlet. Clean the base unit with a slightly
dampened soft cloth. Caution! Do not use liquids to wipe the base unit and the
power connections. Do not use any aggressive, strong or abrasive cleaning agents.
The stainless steel bowl can be cleaned in the dishwasher or using soap water.
The mixing attachments are not dishwasher safe and can be cleaned using soap
water.
To clean the appliance quickly and immediately after use, fill the stainless steel
jar with warm water up to about 60 %, add some detergent and let the appliance
run briefly with the mixing attachment. Then remove the stainless steel bowl and
shake it a little. Finally, rinse the stainless steel bowl and the mixing attachment
with clean water until all the residues and detergent are removed.
Allow all parts of the appliance to dry completely!
32
English
Publicité
