Power Supply - Philips ACT 7583 Mode D'emploi

POWER SUPPLY

Batteries
(supplied or optionally available)
With this set you can use either:
• alkaline batteries (type LR6, UM3 or AA), or
• the rechargeable ECO-PLUS NiMH batteries AY 3362. Make sure you purchase
these special batteries, as any other batteries cannot be recharged on this set.
Inserting batteries
1 Unfasten the buckle.
2 Open the CD lid.
3 Open the battery compartment and insert either
2 alkaline batteries or the AY 3362 batteries.
Notes: – Old and new or different types of batteries
should not be used in combination.
– Remove batteries if they are empty or if the
set will not be used for a long time.
Batteries contain chemical substances, so they
should be disposed of properly.
Indication of battery condition
• Full batteries: no indication.
• Weak batteries: a flashes. This symbol is not
shown when the rechargeable batteries are used.
• Empty batteries: A flashes and bAtt is
displayed. Replace the batteries or connect the
mains adapter.
Average playing time of batteries under normal conditions
Battery type
Normal
Alkaline
NiMH
6
All manuals and user guides at all-guides.com
ESP off
5 hours
14 hours
10 hours
ESP on PSM
4 hours
12 hours 18 hours
8 hours 12 hours
6 hours