Tangent QUATTRO Mode D'emploi page 22

2. Navigate to top-level menu item 'Media Player' using the SELECT and
BACK buttons.
3. Press the SELECT button.
4. Turn the TUNE knob until 'Playback Mode' is displayed.
5. Press the SELECT button.
6. Turn the TUNE knob until 'Repeat' is displayed.
7. Press the SELECT button.
8. Turn the TUNE knob to select YES/NO to confirm that repeat mode
should be enabled.
Set up a Windows PC to allow the radio to access
your audio files via a UPnP server
1. If your PC is running Microsoft Windows XP, then you can use
Windows Media Player 11 (WMP11) to act as your UPnP (Universal
Plug and Play) media server 1.0. Windows Media Player 11 may be
downloaded from Microsoft's website and installed by following the
instructions detailed in its installation wizard.
2. Once installed, Windows Media Player 11 will create a library from all
the media files available to it on your PC. To add new media files to
the library, select 'File > Add to Library... > Advanced Options', click
'Add' and choose the files you wish to add and click 'OK'.
3. You will now need to connect your Internet radio to Windows Media
Player 11 and configure it to allow the radio to access your media
library. In order to this, you will need to do the following:
•
•
•
•
Keep pressing BACK to get to the radio's top-level menu
and then turn the TUNE knob to select 'Media Player'.
Press SELECT and then turn the TUNE knob to highlight
'UPNP Servers'.
Press SELECT and the radio will scan for all available UPnP
servers. Note, this may take a few seconds for the radio to
complete its scan and before the scan has completed, the
radio will display '[Empty]'. The radio will continue to display
'[Empty]' if no UPnP servers are found.
After a successful scan, select your UPnP server, by rotating
the knob if there is more than one UPnP server, and then
press SELECT (note, your radio will display 'Access Denied'
at this stage).
22