Tangent QUATTRO Mode D'emploi page 12

SELECT button after each character. Note that WEP and WPA codes are
sensitive to upper and lower case characters so you must enter them exactly.
After the final character, use the TUNE knob to select the END character and
press the SELECT button.
The radio should now be able to connect to the network.
Choosing a radio station to listen to
1. Press the SELECT button to return to the top-level menu.
(Note: if you make a mistake at any point, press the BACK button to
go back to the previous screen.)
< Stations
2. If the screen does not say < Stations > as shown above, turn the
TUNE knob until it does.
3. Press the SELECT button.
4. Turn the knob to choose from <Location> or <Genre>.
<Location> enables you to choose from the radio stations provided by
any country which you choose from a list.
<Genre> enables you to choose radio stations according to their
content, for example Classic Rock, Sport, News, etc.
5. Press the SELECT button to choose the option you want.
<Location>
1. Turn the TUNE knob until the display shows the region you want,
2. Press the SELECT button.
3. Turn the TUNE knob until the display shows the country you want.
4. Press the SELECT button.
5. Turn the TUNE knob to choose between [All Stations] or [By Genre]
6. Press the SELECT button.
7. Turn the TUNE knob until the display shows the station you want to
listen to.
8. Press the SELECT button and wait until the radio connects to that
station.
Note that some radio stations do not broadcast 24 hours per day, and some
stations are not always on-line.
>
12