Led And Beeper Indications - Datalogic PowerScan RF SR Guide De L'utilisateur

LED and Beeper Indications

18
The Base Station LED indicators and the scanner's LEDs and beeper
are used to announce system status and perform other useful signals.
The tables below list the default function of each of the various indica-
tors.
Some LED and beeper indications can be disabled
or modified via scanner programming. The tables
indicate the default behavior of the indicators, with
shaded rows representing features that are pro-
NOTE
grammable.
Table 1. Scanner GREEN LED Functions
LED
INDICATION
100ms on, 900 ms off
Disable
Indication
Good Read
500 ms on
Indication
500 ms on, 500 ms off
Program Mode
Continuous flashing
Indication
Varies. Consists of a long flash
Field Replace-
followed by multiple short
able Unit (FRU)
flashes.
Indications
Two flashes at 100 ms on, 350
Low Battery
ms off.
Indication
DURATION COMMENT
Indicates the scanner has
been disabled.
Indicates a bar code has
been read and decoded.
Indicates the scanner is in
Programming Mode.
Enables service techni-
cians to identify Field
Replaceable Unit (FRU)
errors.
Occurs at trigger pull before
the laser is enabled. Indi-
cates the battery is in need
of recharging.
®
PowerScan RF Scanner