Smart Features; Before Using Tag On; Using The Tag On Function - LG LSSG3016ST Manuel Du Propriétaire

SMART FEATURES

Before Using Tag On

The Tag On function allows you to conveniently
use LG Smart Diagnosis™, set the cook mode and
®
EasyClean features, and communicate with your
appliance using a smart phone. To use the Tag On
function:
1
Download the LG Smart Oven application to a
smart phone.
2
Turn on the NFC (Near Field Communication)
function in the smart phone. The Tag On function
is only compatible with smart phones that are
equipped with the NFC function and based on
the Android 4.0 (Ice Cream Sandwich) or later
OS (operating system).
Turning On the Smart Phone's NFC
Function
1
Enter the Settings menu of the smart phone
and select Share & connect under WIRELESS
NETWORKS.
2
Set NFC and Direct/Android Beam to ON and
select NFC.
3
Check Use Read and Write/P2P receive.
NOTE
• Depending on the smart phone manufacturer
and Android OS version, the NFC activation
process may differ. Refer to the manual of the
smart phone for details.
• You can activate Tag On function by using the
Android 4.0 smart phone with NFC function or
higher. NFC function may not work depending
on smart phones.
All manuals and user guides at all-guides.com

Using the Tag On Function

The Tag On Icon
Turn the oven mode knob to select Tag On. Look for
the Tag On icon on the control panel. Position the
smart phone next to the icon when using the Tag On
function with the LG Smart Diagnosis™, cook mode
setting and EasyClean
Oven application.
The NFC Antenna Position
When using the Tag On function, position the smart
phone so that the NFC antenna inside the back of
the smart phone matches the position of the Tag On
icon on the appliance. (The position of the antenna
cannot be seen, so the LG Smart Oven application
will attempt to find it and display a target range for the
antenna on the smart phone's screen.)
If the application is not able to show a target range,
position the center back of the smart phone over
the Tag On icon on the appliance. If the connection
is not made immediately, move the smart phone
very slightly in a widening circular motion until the
application verifies the connection.
Because of the characteristics of NFC, if the
transmission distance is too far, or if there is a metal
sticker or a thick case on the phone, transmission will
not be good.
Press [
a more detailed guide on how to use the Tag On
function.
SMART FEATURES
®
features of the LG Smart
] in the LG Smart Oven application for
41