How To Use Washer - Saba LFS914GZ17EW Mode D'emploi

How to use washer

Note:
' ' is for Standard Cotton program.
at 60 °C and 40 °C are suitable to clean nor-
mally soiled cotton laundry and they are the most ef-
ficient programs in terms of combined energy and water
consumptions for washing that type of cotton laundry; in
addition, the actual water temperature may differ from
GB
the declared cycle temperature.
The running time above is for the default programs,
which is only for reference, and it may different because
of different laundries, weights and washing temperature.
The "00" means the temperature of water is normal. The
default options of the programs are in boldface.
Before washing clothes for the first time, you must run a com-
plete cycle without clothes.
To do these:
1. Connect the power and turn on the tap.
2. Turn the knob to position "
3. Press " " (Start / Pause).
It can remove the water which is left in the tub because of
manufacturer's checking out.
Washing preparation
1. Connect the inlet hoses well and turn on the tap
64
" (Daily).
2. After making sure the power socket is grounded reliably,
insert the power plug into the power socket.
3. Place the drain hose well.
Preparation of clothes
1. Sort the laundry by colour and by care label.
Most garments have a textile care label in the
collar or side seam.
2. Make sure all the pockets are empty, foreign
objects (e.g. nails, coins paper clips, etc.) can
cause damage to garments and components in
Diagram 1 the machine.
3. Close any zips, fasten hooks and eyes etc. before
washing.
4. Dark textiles often contain excess dye and
should be washed separately several times
before being included in a mixed load. Always
wash whites and coloureds separately.
5. Badly soiled areas, stains etc. should be pre-treated with
liquid detergent, stain removers etc.
6. Turn over the clothes which pill easily and is with woolen
surface before putting them into the machine.
Diagram 1
GB
Diagram 2
Diagram 3
65