Installation; Accessories; Removing Transit Bolts - Saba LFS914GZ17EW Mode D'emploi

13
14
15
13. Connection cable
GB
14. Transit bolts
15. Back cover
16. Cold water inlet valve
Note: The drawing of machine in the manual is only
used for instruction. It may be vary from the model you
buy.
50

Installation

Before Use
16
Backout packing
• Remove all the packing (including
the foam base) or the vibration
and noise may occur.
• Dispose all the wrappage safely
and keep them out of the reach of
children. Danger of suffocation!
• It is normal that water drops appear on the packing plastic
bag and the door glass, which are resulted from the water
left in the tub for checking out.

Accessories

Make sure that you have received all of the items shown below.
Accessories Name

Removing transit bolts

• Remove all the transit bolts at the back of the machine with
tools.
• Plug the holes with the transit bolts caps supplied.
Note: Strong vibration, noise or failures may occur if
the transit bolts are not removed.
Qty. Accessories Name
Inlet hose 1
Transit bolts 4
caps
GB
Qty.
"U" piece 1
Manual 1
51