Switching Between Touch Control And Automatic End Run - Selve commeo Multi Send BASIS Notice

PREMIUM version

16.8.2. Switching between touch control and automatic end run

Note: This section describes how to set touch control for a group, i.e. multiple drives and
receivers. You can activate/deactivate touch control for individual channels separately in the
"Channels" menu.
Note: When touch control is activated, the drive moves when you press the movement
buttons (up) and
button, the drive will stop within one second. If you press and hold the button for longer than
1 second, the drive will switch to automatic end run mode.
Touch control is deactivated upon delivery.
Select the "Touch control" menu item using the movement buttons
(up) and (down). Use the channel selection buttons
vate/deactivate the function.
: "Touch control" activated.
: "Touch control" deactivated.
Press the right display button
(down) with a delay of 0.5 seconds. Once you release the movement
to save and return to the menu.
133
and to acti-
EN