Intermediate Position, Ventilation/Tilt, Prog End Limit (Time/Position Programming) - Selve i-R Multi Send Notice D'utilisation

Programming
GB
SETTING
INTERMEDIATE POSITION, VENTILATION/TILT, PROG END LIMIT
(Time/position programming)
1.You have confirmed the HOLIDAY menu level. INTERMEDIATE
POSITION will appear.
2.You can set the switching time to move to the INTERMEDIATE
POSITION using the +/- button. The switching time is indicated
in a few seconds or you can move to the INTERMEDIATE
POSITION from the upper end limit using the DOWN/UP button.
3. Confirm by pressing OK.
4.You can set the switching time to move to VENTILATION/TILT
using the +/- button. The switching time is indicated in a few
seconds or you can move to the VENTILATION/TILT from the
lower end limit using the UP/DOWN button.
Confirm by pressing OK.
5.You have confirmed the VENTILATION/TILT menu level.
PROG END LIMIT/PROG INTERMEDIATE POSITION or
PROG VENTILATION/TILT will appear.
6.You can select PROG END LIMIT, PROG INTERMEDIATE
POSITION and PROG VENTILATION/TILT using the
+/- button.
7. Confirm your selection by pressing OK.
8. The function PROG END LIMIT has now been set.
Please read on for further programming options using the
SETTING menu.
52