Factory Setting; Default Values; Time And Date; Timers - Selve commeo Multi Send BASIS Notice

General section (BASIS and PREMIUM)

11. Factory setting

11.1. Default values

11.1.1. Time and date

The current time and date (CET) are preset and can be adjusted individually.

11.1.2. Timers

The timers of the first two clocks are preset to these values.
First clock
Mode: Mo–Fr and Sa–Su:
"individual switching time" preset.
Destination: (e.g. for roller shutters:
"Move shutter to upper end
position").
Mo–Fr: 07:00
Sa–Su: 08:00

11.2. Resetting (= RESET) the device to the factory setting (= delivered state)

9 s
Note: If you have upgraded the device to PREMIUM, this status is retained after a reset.
Press and hold the SELECT and PROG. buttons on the rear side of the
commeo Multi Send simultaneously for 9 seconds.
Use the and buttons to select the menu item you wish to reset. In
the menu item, use the
menu item.
= RESET is executed
= No RESET
Press to execute the reset or
Press to confirm or
Press to confirm and follow the wizard to perform commission-
ing again, as described in "Getting started".
Second clock
Mode: Mo–Fr and Sa–Su:
"Astro evening" preset.
Destination: (e.g. for roller shutters:
"Move shutter to lower end
position").
Mo–Fr: 20:00
Sa–Su: 20:00
or button to activate or deactivate this
to return to the main menu.
to return to the selection page.
89
EN