Leister LE 10000 DF-C Instructions D'utilisation page 10

Declaration of Incorporation
EU Declaration of Incorporation
(pursuant to EC Machinery Directive 2006/42/EC; Appendix II 1. B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil, Switzerland hereby declares that the
partly completed machinery
Designation
Type
fulfills the following essential requirements of the EC machinery directive (2006/42/EC):
1.1.1, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.1, 1.5.2, 1.6.3, 1.7.1, 1.7.3.
The partly completed machinery is furthermore in compliance with the requirements of the following EC Directive(s):
EC Directive(s)
Harmonized standards
In addition, we declare the relevant technical documentation for this partly completed machinery is compiled in
accordance with Annex VII (part B) and will be electronically transmitted to national authorities in response to a
reasoned request.
Name of the authorized document official: Thomas Schäfer, Manager Product Conformity
The partly completed machine must not be put into service until the final machinery into which it is to be incor-
porated has been declared in conformity with the provisions of the EC machinery directive (2006/42/EC), where
appropriate.
Kaegiswil, 09/28/2021
UK Declaration of Incorporation
(in terms of The Supply of Machinery (Safety) Regulations 2008, Annex II 1.B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares the partly
completed machinery
Designation:
Type:
fulfills the following essential requirements of The Supply of Machinery (Safety) Regulations 2008 (2008 No. 1597):
1.1.1, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.1, 1.5.2, 1.6.3, 1.7.1, 1.7.3
The partly completed machinery furthermore complies with the provisions of the following UK Statutory Instruments:
UK Statutory Instruments: 2012 No. 3032 (The Restriction of the Use of Certain Hazardous Substances in
Designated Standards:
Authorised documentation representative: Thomas Schäfer, Manager Product Conformity
Kaegiswil, 09/28/2021
10
Air heater
LE 10000 DF-C
RoHS Directive 2011/65/EU
EN ISO 12100, EN 60335-1, EN 60335-2-45, EN 62233, EN IEC 63000
Bruno von Wyl, CTO
Air heater
LE 10000 DF-C
Electrical and Electronic Equipment Regulations 2012)
EN ISO 12100, EN 60335-1, EN 60335-2-45, EN 62233, EN IEC 63000
Bruno von Wyl, CTO
Christoph Baumgartner, GM
Christoph Baumgartner, GM