Kohler K-99696 Guide D'installation Et D'entretien page 9

AC
Power
Component
Controller
Cable
Connections
Digital
Valve(s)
3. DTV+ System Layout
The amplifier can be controlled digitally when connected to the
K-99695 system controller. The controller powers the interface(s) and
controls the amplifier and other system components.
NOTE: A data cable is provided to connect the amplifier to the
controller. If the amplifier is not within 6' (1.83 m) of the controller,
obtain a longer Ethernet-style cable or add an extension cable.
Disconnect the power from the amplifier and the controller.
Connect one end of the data cable into the port on the back of the
amplifier.
Connect the other end of the cable into one of the eight grouped
component ports on the controller.
Reconnect the power to the amplifier and the controller.
Before Operating the DTV+ System For the First Time:
Download and install the latest software for connected components.
This may take an hour or more to complete based on system
configuration and internet connection speed. Do not disconnect the
power from any components during software download and
installation.
For more information on system setup and operation, refer to the
guide on the controller product page at www.us.kohler.com.
Kohler Co.
Router
6' (1.83 m) Data Cable
AC Power
9
Interface
(Up to Three)
Speakers
Amplifier
1232038-2-A