Kohler K-99696 Guide D'installation Et D'entretien page 4

Range and Function Disclaimer (cont.)
BLUETOOTH transmitter (mobile phone, tablet, etc.) as possible. The
less distance between the two devices, the greater will be the reliability
of your BLUETOOTH audio signal, and the less distance means less
obstacles in the medium through which the transmission is passing, so
there is a reduced chance of audio signal loss.
The compatibility of the BLUETOOTH amplifier to mobile/portable
devices differs according to the various individual devices and, in
particular, may vary with different software versions for a device. All
functions are based on industry-wide communications standards.
Compatibility between the BLUETOOTH amplifier and mobile device
is therefore largely dependent upon the software version of the mobile
device. Other factors (e.g. installation location, walls, distance) mean
that in individual cases, sporadic impairment of functions may occur in
devices that otherwise function reliably. Not all functions are
supported in all countries.
Because of these reasons, Kohler Co. can assume no guarantee for the
unlimited compatibility and functionality of your mobile device in
conjunction with the BLUETOOTH amplifier.
_________________________________________________________________
The BLUETOOTH word mark and logos are registered trademarks
®
owned by Bluetooth SIG, Inc. and any use of such marks by Kohler
Co. approved suppliers is under license. Other trademarks and trade
names are those of their respective owners.
Specifications
Ambient Temperature
Maximum Relative Humidity
Electrical Service
Power Cable Length
Data Cable Length
Output Power
Frequency Response
Signal/Noise Ratio
Total Harmonic Distortion
1232038-2-A
Max 104°F (40°C)
90% non-condensing
100-240 VAC, 50-60 Hz, 1.2 A Max
69" (1753 mm)
6' (1.83 m)
20 Watts x 2 into 4 Ohms
20 Hz - 18 kHz +/- 3dB
>75 dB
<0.1% at 1 Watt, <1% at full output
power
4 Kohler Co.