Kohler K-99696 Guide D'installation Et D'entretien page 11

3.5 mm 3.5 mm
Line-In (1) Line-In (2)
LED
Front
5. Operation
NOTE: Set your music device to a midrange volume after
connecting to the amplifier, but prior to sending an audio signal
from the device.
Status LED Light
Yellow = standby mode.
Blue blink = standby mode with BLUETOOTH
Blue = audio input from a BLUETOOTH device.
Green = audio input from the front or back 3.5 mm line-in port.
3.5 mm Stereo Input
A wired audio device can be connected to either the front or back
line-in ports.
The front line-in port (1) will override the back port (2).
Once a signal is detected from the device, the LED will turn
green and the audio input will fade in.
If the LED does not turn green when the device is turned on,
increase the volume on the device.
Audio input may be slightly delayed when a device is initially
connected.
Wireless Input
Once a BLUETOOTH device is connected, the LED will blink
blue.
The amplifier will display on the device as "Kohler KA02."
If a BLUETOOTH pin is required, enter "0000."
Kohler Co.
Speaker
Terminal
DTV+ Data
Cable
3.5 mm
Line-Out
Back
connection.
®
11
Power
Cable
1232038-2-A