Kohler K-99696 Guide D'installation Et D'entretien page 6

3.5 mm 3.5 mm
Line-In (1) Line-In (2)
LED
Front
1. Preparation
Plan the location of the amplifier to allow access to the front and
back ports.
To play your personal music files, you need a wireless
BLUETOOTH device, or a device with a 3.5 mm stereo cable
connection.
The speaker terminal connections on the amplifier will accept a
12-24 AWG wire. Follow local codes for speaker wire type and
routing.
Allow adequate reach for wires between the amplifier and
speaker locations.
Make sure the LED light will be visible after installation.
For DTV+: Allow adequate reach for the data cable between the
amplifier and the system controller, or obtain a longer
Ethernet-style cable or extension cable.
1232038-2-A
Speaker
Terminal
DTV+ Data
Cable
3.5 mm
Line-Out
Back
6
Power
Cable
Kohler Co.