Helpful Hints - Texi Joylock 2/4 Manuel D'utilisation

EN

HELPFUL HINTS

REPLACING THREAD SPOOLS
When replacing thread spools, the following steps
may be helpful for quick changeover.
1. Cut off existing threads near the spools. Tie the
cut ends thread from new spools as illustrated
(seamen's knot).
2.
Raise presser foot.
3.
Lower needle bar to its lowest position by
turning hand wheel away from you. Carefully
pull the existing threads until the connecting
knots pass through needle eye and looper eyes.
70
Texi Joylock 2-4 instrukcja 2017.indd 70 Texi Joylock 2-4 instrukcja 2017.indd 70
Texi Joylock 2/4
18.09.2020 11:48 18.09.2020 11:48