Starting To Sew; Threading Your Machine - Texi Joylock 2/4 Manuel D'utilisation

EN

2. STARTING TO SEW

THREADING YOUR MACHINE

Wrong threading may cause shipped stitches, breaking threads, or other problems.
Try to master the correct threading before moving on to test sewing.
Threading must be carried out in the sequence of Lower Looper – Upper Looper –
Needle.
Open the front cover and the working table.
Raise needle to its highest point by turning hand wheel towards you, and raise the
presser foot.
Before re-threading lower looper, remove thread from needle eye first, then re-
thread the lower looper. This will prevent tangling.
NOTE: Thread tension is released when the presser foot is lifted up.
66
Texi Joylock 2-4 instrukcja 2017.indd 66 Texi Joylock 2-4 instrukcja 2017.indd 66
Texi Joylock 2/4
18.09.2020 11:48 18.09.2020 11:48