Possible Problems And Advices - Texi Joylock 2/4 Manuel D'utilisation

POSSIBLE PROBLEMS AND ADVICES

PROBLEM
Irregular
Stitches
Breaking
Needle
Puckering
Wavering
Skipping
Stitches
Breaking
Threads
Texi Joylock 2-4 instrukcja 2017.indd 81 Texi Joylock 2-4 instrukcja 2017.indd 81
PROBABLE CAUSE
Incorrect Thread Tension(s).
Incorrect size Needle.
Improper Threading.
Pulling fabric.
Loose Presser Foot.
Pulling fabric.
Incorrect size Needle.
Incorrect setting of Needle.
Loose Presser Foot.
Incorrect Thread Tension(s).
Bent or blunt Needle.
Differential feed is set
Incorrectly.
Differential feed is set
Incorrectly.
Improper Threading.
Incorrect size Needle.
Bent or blunt Needle.
Incorrect setting of Needle.
Improper Threading.
Bent needle.
Thread Tension(s) too tight.
Incorrect setting of Needle.
Thread Spool tangled.
Texi Joylock 2/4
CORRECTION
Reset thread tension(s).
Choose correct size Needle for
Thread and Fabric.
Re-thread machine.
Do not pull Fabric; guide it
gently.
Reset Presser Foot.
Do not pull Fabric; guide it
gently.
Choose correct size Needle for
Thread and Fabric.
Reset Needle.
Reset Presser Foot.
Reset Thread Tension(s).
Insert new Needle.
Set it at less than 1.
Set it at 1 or at more than 1.
For knitted fabrics.
Reset thread machine.
Choose correct size Needle for
Thread and Fabric.
Insert new Needle.
Reset Needle.
Re-thread machine.
Insert new Needle.
Reset thread tension(s).
Reset needle.
Reset spool properly.
EN
81
18.09.2020 11:48 18.09.2020 11:48