Converting To Two-Thread - Texi Joylock 2/4 Manuel D'utilisation

CONVERTING TO TWO-THREAD

To convert to two thread use, first open the front cover and working table and raise
needle to its highest point by turning hand wheel towards you. Remove the right
needle and use the left needle.
Please keep the unused needle on the needle pad.
Pull out the convertor as shown in Fig.1.
Attach the two-thread convertor onto the upper looper as shown in Fig. 2, Fig.3.
When not using convertor, insert it deep and keep as illustrated in Fig.4.
Texi Joylock 2-4 instrukcja 2017.indd 73 Texi Joylock 2-4 instrukcja 2017.indd 73
Texi Joylock 2/4
EN
73
18.09.2020 11:48 18.09.2020 11:48