Technical Data; Protecting The Environment - Black & Decker BDCHD18 Traduction Des Instructions D'origine

Troubleshooting
Problem Possible cause
Unit will not start. Battery pack not
charged.
Battery pack will not Charger not plugged in.
charge.
Surrounding air
temperature too hot or
too cold.
Unit shuts off abruptly. Battery pack has
reached its maximum
thermal limit.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shutoff
abruptly when the
charge is depleted
Maintenance
Your BLACK+DECKER tool has been designed to
operate over a long period of time with a minimum
of maintenance.
Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Your charger does not require any maintenance
apart from regular cleaning.
Warning! Before performing any maintenance on
the tool, remove the battery from the tool. Unplug
the charger before cleaning it.
♦ Regularly clean the ventilation slots in your
tool and charger using a soft brush or dry
cloth.
♦ Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
♦ Regularly open the chuck and tap it to remove
any dust from the interior.

Protecting the environment

Separate collection. Products and
batteries marked with this symbol must
not be disposed of with normal household
waste.
Products and batteries contain materials that can
be recovered or recycled, reducing demand for
raw materials.
Please recycle electrical products and batteries
according to local provisions. Further information
is available at www.2helpU.com
All manuals and user guides at all-guides.com

Technical data

Possible solution
Voltage
Check battery pack
charging requirements
No-load speed
Plug charger into
Max. torque
a working outlet.
Chuck capacity
Move charger and
Max Drilling capacity
battery pack to
a surrounding air
Steel/wood/Masonary
temperature of above
Weight
40 degrees F (45ºC) or
below 105 degrees F
Charger
(+40.5ºC)
Input voltage
Allow battery pack to
Output voltage
cool down.
Current
Place on charger and
Approx. charge time
allow to charge.
Charger
Input voltage
Output voltage
Current
Approx. charge time
Charger
Input voltage
Output voltage
Current
Approx. charge time
Battery
Voltage
Capacity
Type
Battery
Voltage
Capacity
Type
Battery
Voltage
Capacity
Type
Level of sound pressure according to EN 60745:
Sound pressure (L
Sound power (L
Vibration total values (triax vector sum) according to EN 60745:
Drilling into metal (a
Screwdriving without impact (a
1.5 m/s
ENGLISH
BDCHD18
V 18
DC
Min 0-360/0-1400
-1
Nm 17.5/40
mm 1-10
mm 10/25/10
kg 0.90 (with battery 1.30)
905898**
V 230
AC
V 18
DC
mA 200
Hours 8 - 20
905902**
V 230
AC
V 18
DC
mA 400
Hours 4 - 10
905998**
V 230
AC
V 18
DC
Amp 1
Hours 1.5 - 4
BL1518
V 18
AC
Ah 1.5
Li-Ion
BL2018
V 18
AC
Ah 2.0
Li-Ion
BL4018
V 18
AC
Ah 4.0
Li-Ion
) 88.7 dB(A), uncertainty (K) 3 dB(A)
pA
) 99.7 dB(A), uncertainty (K) 3 dB(A)
WA
, ) <0.45 m/s , uncertainty (K) 1.5 m/s
2
h D
) <1.2 m/s 2 , uncertainty (K)
h
2
2
9