Introduction - Auping Royal 300 Mode D'emploi

1. Introduction

You have selected an Auping Royal,
The Bed; completely tailored to your
own needs. The Bed is built in a
modular manner and consists of a
base (Royal Support), a mesh base
and a mattress. The adjustability
options of the mesh bases vary from
type to type. Mattresses vary in
terms of materials used and
functions.
In the case of Royal mesh bases,
Auping offers you the Individual
Measurement System. For optimal
comfort, the correct length and
width of your bed are of great
importance. To ensure optimal sitting
comfort in bed, the length of the
upper leg support is available in
various lengths.
All Royal mattresses are suitable for
adjustable Auping Royal mesh bases.
The mattress is adapted to the
weight distribution of the body by
means of comfort zones. The
shoulder zone is somewhat more
pliable, while the sitting area has
been extra strengthened. This zoning
gives extra comfort and better
support for both sitting and lying on
the mattress.
Thanks to its smooth fibres, the
underside of the mattress glides
over the back section of the mesh
base during adjustment.
GB2
The mattress is fastened to the
mesh base with mattress
connectors. The mattress cannot
slide downward and follows the
movements of the mesh base
effortlessly. The mattresses are
constructed asymmetrically from
various materials and therefore do
not need to be turned.
The components of Auping Royal can
be used together in any combination.
In addition, the basic version can be
combined with various bed models
and accessories.