Hendi 222140 Mode D'emploi page 10

Variable speed operation (Model: 222140, 221884, 221891, 222393)
Follow steps 1 to 7 above, then:
• Change the speed of the motor by turning the
variable speed button (2) towards the maximum
or minimum as required. It is advisable to start
the device at a low speed when using the whisk.
REMARKS:
Blender function: For better control, we recom-
mend you hold the bender by the handle and the
bottom of the motor unit. Furthermore, we recom-
mend you tilt the bender slightly to prevent the bell
from touching the bottom of the container. Always
make sure that the bell is sufficiently immersed to
avoid splashing and that the air vents of the motor
unit do not come into contact with any liquid. For
optimum efficiency, two-thirds of the blending arm
should be immersed in the mixture being prepared.
EN
10
With the self-regulating speed system, the se-
lected speed will remain constant even if the
consistency of your mixture changes.
Whisk function: You can also hold the device with
one hand the bowl with the other hand if neces-
sary. During operation we recommend you move
the whisk around in the bowl in order to ensure
that the mixture is completely homogeneous. Keep
the whisk away from the sides of the bowl. For
maximum efficiency, at least one-fifth of the whisk
length should be immersed. Never immerse the
whisk holder in the mixture.