Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION—ELECTRICAL CONNECTIONS
GROUNDING INSTRUCTIONS:
The ground wire in the conduit is connected to the
cooktop frame. Effective January 1, 1996, the National
Electrical Code will not permit grounding through neutral.
If used in new construction after January 1, 1996 or in a
mobile home, recreational vehicle or if local codes do not
permit grounding through the neutral white lead, attach
the appliance grounding lead (green or copper) to the
residence grounding conductor (green or bare copper)
in accordance with local codes. When connecting to a 3
CHECKLISTS
1
PRE-TEST CHECKLIST
A Remove all protective film, if present, and any
stickers.
B Check to be sure that all wiring is secure and not
pinched or in contact with moving parts.
C Check level of appliance.
D Check that the cooktop is properly grounded.
2
OPERATION CHECKLIST
A Remove all items from the top of the cooktop
surface.
B Turn on the power to the cooktop (refer to your
Owner's Manual). Verify that all surface burners
operate properly.
C Check that the circuit breaker is not tripped nor
the house fuse blown.
D Check that conduit is securely connected to the
junction box.
8
Installation Instructions
conductor branch circuit, if local codes permit, connect
the ground connector lead of the cooktop to the branch
circuit neutral (gray or white in color).
WARNING
If the cooktop is being installed into a
blind counter (one with no cabinet opening below), wire
connections must be made before putting the cooktop
into the cutout opening.
31-2001161 Rev. 1
Publicité
Table des Matières
