Safety Rules; Terms Of Warranty - DEA SYSTEM GEKO Notice D'emploi Et Avertissements

This guide has been prepared for the final users of the automatism; the installer is required to deliver this gui-
de and illustrate its contents to the person in charge of the system. The latter must then provide similar instruc-
tion to all the other users. These instructions must be carefully conserved and easily available for consultation
when required.
Good preventive maintenance and frequent inspection ensures the long working life of the product. Contact
the installer regularly for routine maintenance and in event of anomaly.
1. Always keep a safe distance from the automatism during operation and never touch any moving part.
2. Prevent children from playing near the automatism.
3. Perform the control and inspection operations prescribed in the maintenance schedule and immediately stop
using the automatism whenever signs of malfunction are noted.
4. Never disassemble parts of the product! All maintenance and repair operations must be performed only by
qualified personnel.
5. The release operation must sometimes be performed in emergencies! All users must be instructed on the use
of the release mechanism and the location of the release keys.
All GEKO models are equipped with a release device which must be operated as follows:
• Disconnect the power supply;
• Lift the cover window (Pic. 9a) and, after having inserted the unlocking key, rotate clockwise until it stops (Fig.
9b).
• The opposite procedure returns GEKO operator to normal working conditions.
WARNING: During this operation gate may present uncontrolled movement: operate with extra care so to
avoid any risk.
The only operation that the user can and must do is to remove branches, leaves, and any other object that
might obstruct the gate's free movement. Warning! Always disconnect the power supply whenever performing
operations on the gate!
Our products are covered by warranty for 36 months from the date of installation. Coverage is limited exclu-
sively to the free repair or replacement of parts recognised as defective. Warranty coverage will not be provided
whenever the products have been tampered with, modified or installed incorrectly or whenever the identification
labels with the respective codes and production dates are missing.
INSTRUCTIONS FOR THE FINAL USER

SAFETY RULES

GEKO RELEASE MECHANISM
CLEANING AND INSPECTIONS

TERMS OF WARRANTY

DEA SYST EM S. p. A. - Vi a Del l a Tec ni ca, 6 - ITALY
3 60 1 3 P IO VEN E R O C C HET TE (VI)
t e l . + 3 9 0 4 4 5 55 0 78 9 - f ax + 39 04 45 5 50 2 65
I n t e r n e t h t t p : \ \ w w w. d ea s y s t e m . c o m - e- ma i l: d e as y s tem@ de a s y s te m.c om