Safety Rules - DEA SYSTEM GEKO Notice D'emploi Et Avertissement

This guide has been prepared for the final users of the automatism; the installer is required to deliver this gui-
de and illustrate its contents to the person in charge of the system. The latter must then provide similar instruc-
tion to all the other users. These instructions must be carefully conserved and easily available for consultation
when required.
Good preventive maintenance and frequent inspection ensures the long working life of the product. Contact
the installer regularly for routine maintenance and in event of anomaly.
1. Always keep a safe distance from the automatism during operation and never touch any moving part.
2. Prevent children from playing near the automatism.
3. Perform the control and inspection operations prescribed in the maintenance schedule and immediately stop
using the automatism whenever signs of malfunction are noted.
4. Never disassemble parts of the product! All maintenance and repair operations must be performed only by
qualified personnel.
5. The release operation must sometimes be performed in emergencies! All users must be instructed on the use
of the release mechanism and the location of the release keys.
WARNING Cut out the power supply of the control panel before manually releasing the door. If for some
reason it is not possible to cut out the power supply, it will be necessary to bring the door and lock it in the
same position where it has been released.
All GEKO models are equipped with a release device which must be operated as follows:
• Disconnect the power supply;
• Lift the cover window (Pic. 9a) and, after having inserted the unlocking key, rotate clockwise until it stops (Fig.
9b).
• The opposite procedure returns GEKO operator to normal working conditions.
WARNING: During this operation gate may present uncontrolled movement: operate with extra care so to
avoid any risk.
The only operation that the user can and must do is to remove branches, leaves, and any other object that
might obstruct the gate's free movement. Warning! Always disconnect the power supply whenever performing
operations on the gate!
INSTRUCTIONS FOR THE FINAL USER

SAFETY RULES

GEKO RELEASE MECHANISM
CLEANING AND INSPECTIONS
DEA SYST EM S. p. A. - Vi a Del l a Tec ni ca, 6 - ITALY
3 60 1 3 P IO VEN E R O C C HET TE (VI)
t e l . + 3 9 0 4 4 5 55 0 78 9 - f ax + 39 04 45 5 50 2 65
I n t e r n e t h t t p : \ \ w w w. d ea s y s t e m . c o m - e- ma i l: d e as y s tem@ de a s y s te m.c om