Exchanging The Removable Plates; Placement Of The Removable Plates - SilverCrest SWEW 750 A2 Mode D'emploi

Exchanging the removable plates

You can choose between 3 diff erent removable plates:
–
–
–
WARNING! RISK OF ELECTRIC SHOCK
► Disconnect the plug from the mains power socket before exchanging the
removable plates.
WARNING! RISK OF INJURY!
► Let the appliance cool down before exchanging the removable plates!
Risk of Burns!
NOTE
► When using the "nut waffl es" and "patterned waffl es" removable plates,
please always ensure that the top removable plate is installed in the top
section of the appliance, and that the bottom removable plate is installed
in the bottom section of the appliance. Use the illustrations in the fold-out
page for orientation.

Placement of the removable plates

1) Open the waffl e iron by releasing the lid locking device 0 and lifting the lid.
2) Upper removable plate: First slide the lower latches 8 into the lower mount-
ings 3.
3) Now press the upper latches 7 onto the locking devices 1, so that the
upper latches 7 spring under the locking devices 1 and the removable
plate is fi rmly seated.
4) Lower removable plate: First slide the rear latches 8 into the rear mountings 6.
5) Now press the front latches 9 onto the locking devices 5 so that the
latches 9 spring under the locking devices 5 and the removable plate is
fi rmly seated.
6) Press fi rmly once in the centre of the lower removable plate to ensure that it
is securely inserted.
SWEW 750 A2
"Nut waffl es" removable plates: for preparing hollow nut waffl e halves,
which can then be fi lled and fi tted together.
"Waffl es" removable plates: for making waffl es.
"Patterned waffl es" removable plates: for preparing hollow patterned
waffl e halves which can then be fi lled and fi tted together.
│ 45 ■
GB